AudioControl LC-1.1500 1500W x 1 Car Amplifier
USD $791.12
Condition : Open box
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Product highlights mono subwoofer amplifier 850 watts RMS x 1 at 4 ohms (1,500 watts RMS x 1 at 2 ohms) Class D amp technology AccuBASS® circuitry for improved bass response MILC™ (Maximum Input Level Control) LED optimization and clip indicators variable low-pass filter (30-230 Hz, 24 dB/octave) fixed subsonic filter: 24 Hz preamp and speaker-level inputs GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input optional wired remote level controller available fuse rating: 40A x 4 wiring and hardware not included with amplifier 1/0-gauge power and ground leads recommended dimensions: 11-15/16"W x 2-1/8"H x 8-1/16"D warranty: 5 years
What's in the boxMono amplifier Four 40A ATO fuses (installed) 2.5mm Allen wrench Quick Start Guide
About this item
Written by Crutchfield's Buck Pomerantz
Massive bass power
Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-1.1500 mono subwoofer amp puts out up to 1,500 watts RMS, so it'll make your subwoofers very happy. The adjustable low-pass and fixed subsonic filters make sure your sub gets only the frequencies it was designed to play, while AudioControl's unique AccuBASS® circuit ensures that your bass sounds great.
Active controls
Most factory radios turn down the lower frequencies as you turn the volume up in order to minimize stress on inexpensive factory speakers. AccuBASS eliminates this bass rolloff, so you get maximum bass performance when you add aftermarket amps to a factory radio. Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional wired remote lets you control bass volume from the front seat.
Works in almost any system
AudioControl designed the LC-1.1500 to work equally well with aftermarket and factory stereos. Speaker-level inputs allow you to connect to almost any factory radio. Signal sensing circuitry turns the amp on via the speaker-level inputs, so you won't need to run a remote turn-on wire throughout your vehicle.
AudioControl LC-1.1500 connection panel
What's in the box
About this item
Written by Crutchfield's Buck Pomerantz
Massive bass power
Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's LC-1.1500 mono subwoofer amp puts out up to 1,500 watts RMS, so it'll make your subwoofers very happy. The adjustable low-pass and fixed subsonic filters make sure your sub gets only the frequencies it was designed to play, while AudioControl's unique AccuBASS® circuit ensures that your bass sounds great.
Active controls
Most factory radios turn down the lower frequencies as you turn the volume up in order to minimize stress on inexpensive factory speakers. AccuBASS eliminates this bass rolloff, so you get maximum bass performance when you add aftermarket amps to a factory radio. Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional wired remote lets you control bass volume from the front seat.
Works in almost any system
AudioControl designed the LC-1.1500 to work equally well with aftermarket and factory stereos. Speaker-level inputs allow you to connect to almost any factory radio. Signal sensing circuitry turns the amp on via the speaker-level inputs, so you won't need to run a remote turn-on wire throughout your vehicle.
AudioControl LC-1.1500 connection panel
Returns Accepted for this item if it's within 60 Days
Price type
IN STOCK
OUT STOCK
.
